2025 Updated Verified 300-425 dumps Q&As - 100% Pass Guaranteed
Provide Valid Dumps To Help You Prepare For Designing Cisco Enterprise Wireless Networks Exam
NEW QUESTION # 134
A network consultant is designing a wireless network for a government agency. The customer requires high security between any device communication. The design includes AireOS, Cisco IOS-XE controllers, and Cisco 4800 Series APs. Which requirement must be met to enhance the mobility group security?
- A. Use a different group name for each mobility member.
- B. Enable MIC authentication between the mobility group members.
- C. Enable Mobility Encryption on the network.
- D. Use a complex group name for the mobility group.
Answer: C
Explanation:
Mobility Encryption: Enabling mobility encryption ensures that the data and control traffic exchanged between controllers in a mobility group is encrypted. This is critical for maintaining high security, especially in environments where sensitive information is transmitted.
NEW QUESTION # 135
A customer has a Cisco wireless network that supports VoWLAN services. The customer wants supported voice clients to receive roaming recommendations and suggestions from APs. This functionality must not impact non-VoWLAN clients. What should be enabled on the VoWLAN SSID?
- A. 802.11r Fast Transition
- B. 802.11k neighbor lists
- C. 802.11v BSS Transition Management
- D. CCKM with 802.1X
Answer: B
Explanation:
To support VoWLAN services and provide roaming recommendations to supported voice clients without impacting non-VoWLAN clients, the feature that should be enabled on the VoWLAN SSID is 802.11k neighbor lists. This feature allows APs to provide information about neighboring APs that are candidates for roaming, which helps clients make better decisions about when and where to roam. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice
NEW QUESTION # 136
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -72 to -67 dBm
- B. -85 to -67 dBm
- C. -85 to -65 dBm
- D. -78 to -65 dBm
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructur minimum is -90 and maximum is -67 for IP phone
NEW QUESTION # 137
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol must the engineer enables on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11k
- B. 802.11w
- C. 802.11r
- D. 802.11i
Answer: A
Explanation:
NEW QUESTION # 138
Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?
- A. A rule is needed at the firewall to allow TCP port 16666 for communication to work.
- B. A rule is needed at the firewall to allow UDP port 97 for communication to work.
- C. A rule is needed at the firewall to allow TCP port 97 for communication to work.
- D. A rule is needed at the firewall to allow UDP port 16666 for communication to work.
Answer: D
NEW QUESTION # 139
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
- A. UDP 16668 for control plane, UDP 16667 for data plane
- B. UDP 16667 for control plane, UDP 16666 for data plane
- C. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
- D. UDP 16666 for control plane, UDP 16667 for data plane
Answer: D
Explanation:
NEW QUESTION # 140
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A. CCKM
- B. SKC
- C. 802.11r
- D. OKC
Answer: D
Explanation:
NEW QUESTION # 141
An engineer as performing a Layer 1 passive wireless site survey utilizing a channel analyzer software in the
2.4 GHz spectrum. Which chart indicates the ratio of interference present during the duration of the capture?
A)
B)
C)
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 142
Refer to the exhibit. An engineer must design a mobility group that has these requirements:
* The mobility group must consist of two WLCs.
* All WLCs must run software version 8.0 or later.
* The WLCs must connect via an IPv4 network.
* Two of the WLCs must be in an SSO high availability pair.
Which two configurations must be included in the design? (Choose two.)
- A. The WLAN SSID must be consistent across all the WLCs.
- B. All the WLCs must be of the same model or type.
- C. Each WLC must use the same mobility domain name.
- D. All the WLCs must run the same software version.
- E. Only WLCs in an SSO high availability pair must use the same virtual IP address.
Answer: A,C
NEW QUESTION # 143
A wireless engineer is designing a wireless network to support real-time applications over wireless.
Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11k
- B. 802.11w
- C. 802.11r
- D. 802.11i
Answer: C
Explanation:
NEW QUESTION # 144
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
- A. UDP 16668 for control plane, UDP 16667 for data plane
- B. UDP 16667 for control plane, UDP 16666 for data plane
- C. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
- D. UDP 16666 for control plane, UDP 16667 for data plane
Answer: D
Explanation:
NEW QUESTION # 145
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11k
- B. 802.11w
- C. 802.11r
- D. 802.11i
Answer: A
NEW QUESTION # 146
A network engineer is asked to configure a "site-to-site" Ipsec VPN tunnel. One of the last things that the engineer does is to configure an access list (access-list 1 permit any) along with the command ip nat inside source list 1 int s0/0 overload. Which functions do the two commands serve in this scenario?
- A. The command access-list 1 defines interesting traffic that is allowed through the tunnel.
- B. The command ip nat inside source list 1 int s0/0 overload provides "many-to-one" access for all devices on a defined segment to share a single IP address upon exiting the external interface.
- C. The command access-list 1 permit any defines only one machine that is allowed through the tunnel.
- D. The command ip nat inside source list 1 int s0/0 overload disables "many-to-one" access for all devices on a defined segment to share a single IP address upon exiting the external interface.
Answer: B
Explanation:
Configuring NAT to Allow Internal Users to Access the Internet Using Overloading
Note in the previous second configuration, the NAT pool "ovrld"only has a range of one address. The keyword overload used in the ip nat inside source list 7 pool ovrld overload command allows NAT to translate multiple inside devices to the single address in the pool.
Reference: http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
NEW QUESTION # 147
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?
- A. redundant controllers in the most restrictive regulatory domain
- B. redundant controllers in the least restrictive regulatory domain
- C. one controller per country code
- D. one controller per continent
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/country_codes.html
NEW QUESTION # 148
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?
- A. A cable in the RP port
- B. The secondary Cisco WLC needs a minimum of 50 base licenses
- C. The primary Cisco WLC is already set as the secondary unit.
- D. SSO needs to be enabled
Answer: A
Explanation:
For Cisco Wireless LAN Controllers (WLCs) to operate in High Availability (HA) with Stateful Switch Over (SSO), they must be connected through a Redundancy Port (RP). This dedicated port is used for synchronization of stateful information and ensuring seamless failover without service interruption.
NEW QUESTION # 149
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)
- A. higher data rates than laptops
- B. no support for 802.11r
- C. lower data rates than laptops
- D. no support for 802.11ac
- E. fewer antennas than laptops
Answer: C,E
Explanation:
NEW QUESTION # 150
Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC.
What is the reason that it is failing?
- A. A rule is needed at the firewall to allow TCP port 16666 for communication to work.
- B. A rule is needed at the firewall to allow UDP port 97 for communication to work.
- C. A rule is needed at the firewall to allow TCP port 97 for communication to work.
- D. A rule is needed at the firewall to allow UDP port 16666 for communication to work.
Answer: D
Explanation:
NEW QUESTION # 151
A shopping mall wants to track customer movement patterns using Wi-Fi. Which Cisco solution should you recommend?
- A. Cisco ClientLink
- B. Cisco DNA Spaces
- C. Cisco CleanAir
- D. Cisco Band Select
Answer: B
NEW QUESTION # 152
......
Cisco 300-425 exam measures a candidate's ability to plan and design wireless infrastructure and WLANs, provide optimal performance, and integrate mobility services into the network. 300-425 exam covers topics such as site surveys, WLAN high-availability, advanced location services, and more. Candidates who pass 300-425 exam demonstrate their expertise in designing and implementing secure, reliable, and scalable wireless networks that meet the needs of enterprise organizations.
Achieve Success in Actual 300-425 Exam 300-425 Exam Dumps: https://braindumps2go.dumpstorrent.com/300-425-exam-prep.html