2024 Latest NSE7_OTS-7.2 Exam Dumps Recently Updated 52 Questions
Fortinet NSE7_OTS-7.2 Real 2024 Braindumps Mock Exam Dumps
Fortinet NSE7_OTS-7.2 exam is a 60-minute exam that consists of 30 multiple-choice questions. NSE7_OTS-7.2 exam is computer-based and can be taken at any authorized testing center. The passing score for the exam is 70%, and candidates who pass the exam will receive their NSE 7 - OT Security 7.2 certification.
The NSE7_OTS-7.2 exam covers a broad range of topics related to OT security, including threat analysis, risk management, network architecture, protocols, and technologies. NSE7_OTS-7.2 exam also assesses the candidate's proficiency in using Fortinet products and solutions for OT security, such as FortiGate, FortiAnalyzer, and FortiManager. NSE7_OTS-7.2 exam is designed for experienced network security professionals who have a good understanding of OT systems and technologies.
NEW QUESTION # 14
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
- C. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
Answer: A
NEW QUESTION # 15
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of a PAM event type.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: A
NEW QUESTION # 16
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to reduce unnecessary traffic.
- B. FortiGate is configured with forward-domains to forward only company domain website traffic.
- C. FortiGate is configured with forward-domains to forward only domain controller traffic.
- D. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
Answer: A
NEW QUESTION # 17
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- B. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- C. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: A
NEW QUESTION # 18
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiSwitch
- C. FortiNAC
- D. FortiEDR
Answer: A
Explanation:
Explanation
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 19
How can you achieve remote access and internel availability in an OT network?
- A. Add additional internal firewalls to access OT devices.
- B. Create more access policies to prevent unauthorized access.
- C. Create a back-end backup network as a redundancy measure.
- D. Implement SD-WAN to manage traffic on each ISP link.
Answer: D
NEW QUESTION # 20
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- B. IT and OT networks are separated by segmentation.
- C. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- D. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
Answer: A,B
NEW QUESTION # 21
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, only when they connect for the first time
- B. Rogue devices, each time they connect
- C. All connected devices, each time they connect
- D. Known trusted devices, each time they change location
Answer: A
NEW QUESTION # 22
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- B. Port5 is not a member of the software switch.
- C. The FortiGate-Edge device must be in NAT mode.
- D. The FortiGate devices is in offline IDS mode.
Answer: A,C
NEW QUESTION # 23
Which type of attack posed by skilled and malicious users of security level 4 (SL 4) of IEC 62443 is designed to defend against intentional attacks?
- A. Users with low access to resources
- B. Users with substantial resources
- C. Users with unintentional operator error
- D. Users with access to moderate resources
Answer: C
NEW QUESTION # 24
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. TACACS
- B. SNMP
- C. API
- D. RADIUS
- E. ICMP
Answer: B,C,D
NEW QUESTION # 25
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Under config user settings configure set auth-on-demand implicit.
- B. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- C. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- D. Enable two-factor authentication with FSSO.
Answer: B
Explanation:
Explanation
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 26
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiAnalyzer device report
- B. A FortiSIEM CMDB report
- C. A FortiSIEM incident report
- D. A FortiSIEM analytics report
Answer: B
NEW QUESTION # 27
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Implementing strategies to automatically bring PLCs offline
- B. Evaluating what can go wrong before it happens
- C. Planning a threat hunting strategy
- D. Creating disaster recovery plans to switch operations to a backup plant
Answer: A,D
NEW QUESTION # 28
Which two frameworks are common to secure ICS industrial processes, including SCADA and DCS? (Choose two.)
- A. IEC104
- B. NIST Cybersecurity
- C. Modbus
- D. IEC 62443
Answer: A,D
NEW QUESTION # 29
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Importation and classification of hosts
- C. Adapter consolidation for multi-adapter hosts
- D. Direct VLAN assignment
Answer: A,B
Explanation:
Explanation
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 30
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. SSL Inspection must be set to deep-inspection to correctly apply application control.
- B. The application filter overrides the default action of some IEC 104 signatures.
- C. IPS must be enabled to inspect application signatures.
- D. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
Answer: B
NEW QUESTION # 31
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- B. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- C. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- D. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
Answer: C
NEW QUESTION # 32
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Configure firewall policies with web filter to protect the different ICS networks.
- B. Configure firewall policies with industrial protocol sensors
- C. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- D. Deploy a FortiGate device within each ICS network.
- E. Use segmentation
Answer: A,B,C
NEW QUESTION # 33
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. Overview
- B. IPS
- C. Risk
- D. Security
- E. List
Answer: A,C,E
NEW QUESTION # 34
......
Fortinet NSE7_OTS-7.2 certification is targeted towards network security professionals who work with industrial control systems (ICS) and supervisory control and data acquisition (SCADA) systems. These professionals may include network administrators, security analysts, and system engineers. Fortinet NSE 7 - OT Security 7.2 certification is also relevant for professionals who work in industries that rely on OT systems, such as manufacturing, energy, transportation, and utilities. Earning the NSE7_OTS-7.2 certification can enhance a professional's credibility and demonstrate their commitment to staying up-to-date with the latest OT security practices. Additionally, certified professionals may be better equipped to protect their organization's OT systems against cyber attacks, which can result in operational downtime, financial loss, and reputational damage.
Verified NSE7_OTS-7.2 Exam Dumps Q&As - Provide NSE7_OTS-7.2 with Correct Answers: https://braindumps2go.dumpstorrent.com/NSE7_OTS-7.2-exam-prep.html